How About That Chinking?

At Schutt Log Homes and Millworks we get a lot of questions about chinking.

I’m going to take you through the process and hopefully give a few tips and tricks along the way. Although it’s not for everyone, chinking is one of my favorite things to do. Just remember don’t get in a hurry, you want a great looking finished project, so take your time and perfect your technic and you will cruise through it.

Chinking is a very important part of the construction of our Oak log home kits. The chinking is basically the glue that holds it all together. (Not really, we recommend Timber lock screws every 3 feet to hold the walls in place). But the chinking is still way up on the list of most important elements of the log cabin structure.

There are many types and manufactures of chinking out there. We have a few we recommend on our website.  We find the best product is one that remains somewhat pliable after application. This will allow for the shrinking and expanding of the logs without tearing the chinking as time goes by.

The process of chinking is rather simple. But it is time-consuming and must be done correctly to achieve the desired look and properly seal the spaces between the logs used in the walls. Once the technic is perfected the process speeds up quite a bit. As I said the process is simple but takes a little time to master. Don’t worry, while you’re building your log home you will get lots of practice chinking. You will be an expert by the end of your project.

I have never used the caulk gun method. Some people really like chinking this way and say it’s much faster. The steps will be the same other than you won’t need to fill the spaces with a putty knife, you will use the caulk gun to do it.

The materials you will need to get started are:

• Backer rod- this is a roll of round foam used to fill the chamfered space under the chinking. This creates a better air barrier and reduces the amount of chinking you will use.
• Chinking- usually a five-gallon bucket. Note keep the lid on the bucket as much as possible to prevent the chinking from drying out.
• A small pallet (a Piece of scrap wood works great) about 12” x 12” to put chinking on. This makes it easier to walk down the wall and allows the lid to stay on the large bucket to keep the chinking from drying out.
• Masking tape- The cheapest you can buy. You will be using a lot of tape.
• Paintbrush- 1” or 2”
• A container of water- something like a large disposable cup or bowl.
• Clean cloth to wipe down the wall and clean up any oops.
• Putty knife- I use the cheap plastic ones. They are flexible but not too flexible.
• If the floors are finished place something on the floors in the event you drop chink. Cardboard or trash bags work well.
• Trash bag or bucket to put the used tape in. Buckets work best for the tape

So, let’s get started learning how to chink. I will try to keep it simple and make the process clear.

• The first thing I do is turn on my favorite music or audiobook. Then pick where you want to start. I recommend in a closet or where cabinets will go, this way it will be hidden if you make a mistake.
• Wipe the wall to clear off any dust.
• Pack the backer rod in the back of the V-space created by chamfering. Try to get it as tight as possible and be sure none of the backer rod is protruding beyond the edge of the log. It will show through the chink.
• Use the masking tape on the flat side (the side facing you) of the chamfered edge of the log. The tape will keep the chinking off the wall where you don’t want it. This part of the process takes some time to perfect. Try to follow the chamfered line closely. It will not be a perfectly straight line which is perfectly fine. The varying chink line adds to the personality of the cabin.
  • Only tape as much wall as you will finish in a couple hours. If you leave the tape on the wall longer than an hour or two the tape will be difficult to remove. You will get very frustrated.
• Use the putty knife to take a few big scoops of chinking out of the bucket and put it on your Pallet.
• Fill the chamfered space on the wall using the putty knife. Be sure to push the chinking into the V-space. Use the putty knife to scrape excess chinking to make it even with the log wall. Your lines will not be perfect
• Wet the paintbrush with water. Use the paintbrush to lightly brush the chinking in one direction. This step will smooth the chinking and make the edges blend.
• Wait about 5-10 minutes. Do NOT let the chinking dry before you pull the tape. It will be a mess!
• Pull the tape being careful not to touch the chinking line.
• If you do damage the fresh chinking use your wet paintbrush or wet your finger and smooth it out.
• Wipe any runs off the wall.

There you have it. Simple, right?

Some important tips to remember are:

• Don’t let your chinking dry out.
• Don’t leave the tape on the wall very long.
• After you apply the chink do not let the chinking dry before you remove the tape.
• Wipe the runs off the wall as soon as possible.
• If you don’t finish a complete line taper the chinking down so when you continue the joint will be blended and not visible.

 

LWS

 

Do you dream of living in a log cabin?

As temperatures drop and the snow is beginning to fall we long for the cozy charm of a log cabin. Just imagine sitting in front of the glowing fire on a chilly night with your loved ones gathered close. No hustle and bustle of the world outside, just quiet contentment in the warm peaceful cabin.

Schutt Log Homes and Mill Works specializes in creating the Oak log cabin kit of your dreams. We will walk you through the process of creating your kit and building your log home. Our goal is to help you create an Oak log home you will love to come home to and hate to leave, a place where families and friends can gather, a home to be loved and cherished for generations to come.

 

If you would like more information about how we can help you turn your log home dreams into reality please check oakcabins.com or give us a ring at 816-506-5713. We look forward to helping you turn dreams into a reality.

LWS

Must have tools for building your Oak log cabin kit

At Schutt Log Homes and Mill Works we have had years of experience building Oak log cabins and Oak log homes. In our experience we have found some tools that are a must have when building a log home kit. There is a lot of hype about some of the latest tools and gadgets but we have found for the most part a few old stand-by’s will get the job done efficiently and correctly.

Below is a list of the tools we recommend. Of course everyone has their favorite brand or go to tool. These are the tools, in our experiences, we found to work the best for us.

Chainsaw- We prefer Stihl, but any good brand with a sharp chain will do.

A chainsaw will be one of the most valued tools you will use when building your log home. This tool is portable and versatile. We use a chainsaw to cut the logs to length, to true up wall ends, to trim, notch, wedge, cut out and any variety of cutting to be done on the logs, rafters, joists, you name it. A chainsaw works much more efficiently than a circular saw for cutting the big stuff

A chainsaw is a must have!

.

1/2″ Heavy duty electric drill- We like Makita or Dewalt, they seem to hold up.

A good 1/2″ electric drill is priceless. The drill is used to predrill holes for the TimberLOK screws and to drive the screws in. The drill with a paddle bit is used to counter sink the TimberLOK screws to make all the surfaces flush. This allows the logs to lay level and allows a smooth surface for the planer.

Electric Hand Planer- Makita or Dewalt. same deal, they seem to hold up.

This tool will get used a lot! As the courses of logs are placed the logs are planed to make a level spot to place the next log. When all the logs are in place the face of the logs will be planed to make a clean, smooth surface to apply the chinking and log preservative. The rafters are planed to make a flat, level surface for the roofing material. This tool is a must have.

Sledge-Hammer- Any good heavy brand will do.

For those delicate adjustments. Haha. A good sledge-hammer will save your back when it comes to moving the logs just a few inches this way or that way. It’s a great work horse.

Tape Measure- Any good brand. Buy several they always disappear.

A good long tape measure is a must. It will get worn out! Measure twice, cut once. Need I say more?

Level, Square, C-clamp- These are pretty basic tools for every carpenters tool box.

We recommend having a couple different sizes of each of these items. Depending on the application a long level will work better a small square will be better. Having several c-clamps on hand is always a good thing to hold the logs or lumber in place until it can be affixed permanently.

These are the basics. Of course there will always be a few other tools needed along the way as the log cabin gets into the finish carpentry stages. Schutt Log Homes and Mill Works will be happy to assist you with any building questions. Our log home experts have the knowledge and experience to guide you through your Oak log cabin building process.

LWS

5 Myths about Log Homes

There are many myths and misconceptions floating around out there about log home building and living. We would like to try to dispel a few of the most common things people are concerned with when deciding if log home living is for them. Schutt Log Homes and Mill Works has been selling Oak log cabin kits for over 10 years and has built their fair share of Oak log homes. Over the years we have heard many myths about log home construction and maintenance, and now we would like share some information we have found to be true about a few of these myths.

1.Log homes are not energy efficient.

We have heard this myth many many times. The fact is, Oak log homes are very energy efficient. Oak by its nature is a dense wood and is excellent at storing heat. Once an oak log is warmed it will continue to stay warm. The reverse is true in the summer, when an Oak log is cooled it will stay cool. A well built Oak log home can retain heat as well or better than a stick framed home. A heating and cooling system in a log home can be up to 15 percent more energy efficient than the same system in a similar traditional wood frame home. Double or triple paned windows will add to the efficiency. It is because of this fact log homes are still being built in some of the coldest regions.

2. Log homes are high maintenance.

The fact is once the Oak log home is built it is relatively low maintenance, provided care is taken during the building process. After the logs are placed a chinking material is placed between the logs and a wood preservative, sealer is applied. That’s it! No drywall, plaster, mud, painting. Depending on the manufactures recommendations most log preservatives need to be reapplied every 5-10 years which is comparable to painting stick homes. Finding a crack in the wall may seem like a major ordeal to a log home, but the truth is, it’s perfectly natural for wood to crack. These cracks pose no structural problems and might just need to be sealed with chinking and a wood preservative.

3. Log homes take longer to build than a stick home

When building an Oak log home the walls go up quickly. Once finished with the log wall you have the interior wall, exterior wall, structural component and insulation of the home complete. Once the Log walls are all up the exterior of the house is complete except for the chink and wood sealant. A framed home has many more steps, framing, plywood, moisture barrier, insulation, siding, drywall, plaster, sanding, plaster, sanding and painting…

4. Log homes are not fire resistant

The truth is Oak is extremely fire resistant. The natural insulation properties of solid log walls is one aspect to be considered. A solid log wall is very resistant to fire due to its mass. Solid log walls are extremely slow to spread fire as compared to traditional frame walls. When a fire enters a frame wall a chimney is formed in the air pockets causing rapid spread of the fire. Since there are no air pockets or cavities in log walls fire is slow to spread.

5. It’s difficult to find a log home builder

This is not true at all. Many builders specialize in log home construction or have log home experience. When a log home builder is not available, conventional builders can learn from construction manuals provided by log home companies. Schutt Log Homes and Mill Works provides a detailed construction manual with each of our Oak log cabin kits.

Though we know there are many more myths out there, we hope we have helped answer a few of the common concerns most people think of when they consider log home living. Schutt Log Homes and Mill Works will be happy to answer any other questions or concerns you may have when debating whether or not living in a log home is right for you and your family.

Mountain View – Schutt Log Homes and Mill Works

lws